Test Method

Flash Point is lowest temperature at which application of the ignition source causes the Vapour of a specimen of the sample to ignite under the specified condition of the test. The temperature of the approximately 70 ml test specimen is increased rapidly at first and then at a slower constant rate as the flash point is approached. At specified intervals a test flame is passed across the cup, to measure the tendency of the test specimen to form a flammable mixture with air under controlled laboratory conditions.

Standard

Conforms to the specifications of: ASTM D93; IP 34; ISO 2719

Manual

•  Temperature .Range: 79 to 400°C.
•  Test Method : ISO 2719, ASTM D 93, IP 34, IS 1448 (P-21).
•  Ignition Source : Crank Mechanism spring loaded with manual handling.
•  Temperature Sensor : Thermometer .
•  Flash/Fire Detector: Manual / Visual flash detection.
•  BController: Energy regulator manual type.
•  Flame-Sampling Arrangement: By Hand.
•  Heater: 800 W, 230 v.

•  Equipment Overall Size (LxWxH): 175mm (W) X 200mm ( D ) X 275 mm ( H )
•  Equipment Gross Weight: 8 Kg.
•  Equipment supply will be 230 V Ac , 50 Hz with 6 amp capacity.